Grouting And Repair Mortar

Shrinkage Compensated Cementitious Grout

Cement based flowable grout with selected aggregate
USES-To grout bearings, machine foundations, columns joints in precast construction etc.-To grout anchors in concrete
-To grout cavities, gaps and voids in concrete

High performance non-shrink cementitious microconcrete for concrete repair

USES - 
SikaRep Microcrete-4 is suitable for producing high performance micro-concrete for deep repairs to all concrete structures such as:
-Highway bridges and culverts
-Whafts and jetties
-Tunnels and mines
-Dams and reservoirs
-Car parks and basements
-Power stations
-Sewerage and water treatment structures
-Anywhere where localised deep repair is required Anywhere additional thickness is required (column and beam jacketing, etc.)
-Structrural strengthening of structure by section enlargement

Description UltraTech POWERGROUT-NS2 is a cement based non-expanding polymer enriched high performance, high early strength, high quality binder for precision grouting applications. POWERGROUT-NS2 is developed by using special polymers, additives and selected fillers. Addition of well graded coarse aggregates of up to 20mm down size is possible for higher volume applications. Variants POWERGROUT - NS2 FLOWABLE POWERGROUT - NS2 NORMAL Specification Technical Parameters complies with following Standards: ASTM C1107, ASTM 190, ASTM C 940, ASTM C 469, ASTM C 348, IS 4031, IS 2770, IS 5816

Features & Benefits

•  Ready to mix Single component system, no hassles of mixing the ingredients
•  Excellent bond strength
•  Non Shrink; Non Expandable Grout
•  Economical with graded coarse aggregates for higher volume applications
• Subsequent usage time in 24 hours
•  Ultimate compressive strength
•  Consistent in quality
•  Enhanced flow properties and pot life
•  Self-Compacting in nature
•  No bleeding and better consistency 

Areas of Application UltraTech POWERGROUT-NS2 is recommended for grouting with design strength of M80 for foundation base plates, machine foundations and beds which demand high strength, for micro piles and pile caps, shear wall bond beams, for fixing and anchoring the precast elements, for manufacturing of high strength pavers and blocks.

Method of Application:

1. Surface Preparation
Prepare the surfaces before the application of UltraTech POWERGROUT-NS2 by removing oil, bond inhibiting agents, dirt, dust and laitance with suitable methods like by using wire brush, water jetting, mopping etc.
Proper checking of reinforcement and other elements to be grouted need to be carried out as per the structural requirements before placing UltraTech POWERGROUT-NS2. The shuttering has to be proper without any gaps or loose materials to ensure nil leakages during the UltraTech POWERGROUT-NS2

usages

Appropriate anti corrosion agents to be applied over the old and renewed reinforcement bars and metal areas before grouting.

Mixing

UltraTech POWERGROUT-NS2 requires 11-11.5% of water by weight of material.
 Add UltraTech POWERGROUT-NS2 to the measure quantity of water with constant stirring using a mechanical mixing device. Mix to a thick lump free consistency.
 Allow to stand for 2 minutes for the mix to mature and then remix to use. Do not add any extra water to alter the mix consistency or to extend the pot life. Further water additions will hamper the strength and adhesion properties of UltraTech POWERGROUT-NS2.

 Application

 Use the mixed UltraTech POWERGROUT-NS2 to the prepared substrate using the appropriate pouring funnels and chutes.
UltraTech POWERGROUT-NS2 should not be vibrated with any mechanical vibrators as it is self-compacting by itself.
Any external vibrations will segregate the mix & there are chances of changes in the product performance from the designed properties.  No water curing is required for internal area grouting; whereas water curing has to be adopted for 3 days in external conditions and during extreme site conditions. 

NOTE

Allow a minimum of 24 hours for the subsequent usage. Do not use if temperatures are likely to drop to below 5°C or exceed 50°C. For temperatures below 20°C allow UltraTech POWERGROUT-NS2 to cure for an extended period of time. The technical data provided in this technical data sheet is as per our internal lab testing and may vary as per the actual method of application at sites.

PACKAGING

25 kg WPP bags 40 Kg HDPE Bag

ShaliFloor® M DH (formerly known as Shalimar Diamond Hard) is a single component, preblended, metallic floor hardener consisting of cleaned, graded, non-oxidizing metallic aggregates, pigments and admixtures.

Application
• Industrial Floors / Warehouses / Machine Shops.
• Processing Plants like fertilizer / Petrochemical units. • Vehicle maintenance floors.
• Loading Docks.
• Main, High Traffic Aisle ways / Gangways.
• Breweries & Bottling plants.
• Joint shoulders reinforcement.

3-Component, High Performance, Pourable Epoxy Grouting System

USESSikadur®-42 IN may only be used by experienced professionals.

High-strengthgrouting and fixing of:-Starter bars-Anchors-Fasteners-Tie rods-Crash barrier posts-Fence and railing postsUnder-grouting and bedding of:-Base plates Machine bases, seat base plates for light and heavymachinery including heavy impact and vibratory machinery,reciprocating engines compressors, pumps,pressesetc.-Bridge bearings-Mechanical joints (i.e. road / bridge / deck types etc.)-Sleeper-less, direct rail fixing of:-Crane tracks-Light rail and permanent way in tunnels-Light rail and permanent way over bridges

Non Metallic Mineral Dry Shake Floor Hardner

Sika® Chapdur (IN) is a one part, preblended, coloured mineral dry shake hardener for concrete comprising of cement, specially selected natural mineral aggregates, admixtures and pigments. Sika® Chapdur (IN) provides a extremely hard wearing and abrasion resistant topping for monolithic floors. When sprinkled and trowelled into fresh wet concrete floors, it forms a coloured,dense and wear resistant smooth surface.