Product Details:
| Minimum Order Quantity | 10 Bucket |
| Usage/Application | Construction |
| Packaging Size | 3Kg |
| Brand | Dr Fixit |
| Coverage | 2.0% By Weight Of Cement |
| Type | Waterproofing Coating |
| Grade Standard | Reagent Grade |
| Purity | 99% |
| Ph Value | 11.0 Ph |
| Shelf Life | 24 Months |
| Packaging Type | Bucket |
| Form Of Chemical | Slurry |
Features & Benefits:
- Elastomeric coating that resists water ingress.
- Strong adhesion to concrete slabs & masonry surfaces.
- CFTRI certified – Safe for potable water tanks.
- Recommended for use in wet areas.
- Ensures right dry film thickness.
- Easy to apply.
Description
Dr. Fixit Pidifin 2K is 2 parts polymer-modified flexible cementitious waterproofing membrane coating specially formulated for Concrete and Masonry Surface which is supplied in ready-mix kits (2 parts). When the dry part is mixed with acrylic-modified emulsion and applied according to direction, the cured. The application can be applied on damp surface and Excellent waterproofing property - No leakage up to 10 m. hydrostatic pressure. Dr. Fixit Pidifin 2K will become a tough, flexible and seamless waterproof membrane and acts as an excellent water barrier to Concrete and Masonry Surface. Environmentally friendly - free Volatile Organic Compound (VOC) Area of Application
Concrete foundations, basements wall and lift pits.
Swimming pools, water tanks and reservoirs
Concealed roofs, parking decks, bathroom, toilet, kitchen, balconies and planters.
Any other concrete, cement or masonry surface subject to damage from moisture
Method of Application
1. Surface Preparation
Allow new concrete and masonry substrate to fully cure prior application.
All surfaces must be free from oil, grease, wax, dirt or any other form of foreign matter which might effect adhesion. Spalled Concrete must be sound before applied.
Substrate should be reach a "Saturated Surface Dry" (SSD) condition (damp, without standing water) 2. Mixing
Using Portland mechanical mixer, slowly add Powder part to Liquid part in a clean container until a smooth and homogenous slurry mixture is achieved.
Allow the mixed slurry to stand for 5-10 minutes for releasing air-trapped during the mixing prior to application. Mixing material must be use within recommend pot life.
3. Applications
Dr. Fixit Pidifin 2K slurry can be applied by brush. DO NOT dilute with water. Recommended total coverage rate is approximately 2 kg./m2 (Minimum 2 coat.)
Allow the slurry to cure for at least 1 hour before applying a second coat.
4. Curing
For maximum protection, allow 12 to 24 hours curing time after the second coat.
Dr. Fixit Pidifin 2K requires at least 7 days before filling spas, swimming pools and water tanks with water as well as mock-up or ponding tests on site” to ‘requires at least 7 days before filling spas, swimming pools and water tanks with water as well as mock-up or ponding tests on site’
5. Cleaning
Dr. Fixit Pidifin 2K can be removed from tools and equipment immediately after use with clean water, only hardened material can removed mechanically.
Drying and curing times are determined under controlled temperatures and relative humidity below 60%, and at average of the DFT range for the product. Surface (touch) dry: The state of drying when slight pressure with a finger does not leave an imprint or reveal tackiness. Dry to over coat, minimum: The recommended shortest time before the next coat can be applied. Dried/cured for service:
Minimum time before the coating can be permanently exposed to the intended environment/medium Precautions & Limitations
Dr. Fixit Pidifin 2K is not suitable for traffic area application.
Dr. Fixit Pidifin 2K is a pre measure package. Do not dilute with water or add any more sand or cement.
Dr. Fixit Pidifin 2K do not be applied by roller Packaging ??? 15 kg/set (2 part : Powder 10 kg and Liquid 5 kg)
Storage
12 month storage in sealed container and room temperature.
